T2000 & T2100 are professional voltametric clamps specially designed to evaluate resistance of earth rods with no need to disconnect any part of the system.
The inner part of the device is made of 2 jaws, one for current reading and the other for voltage generation. The voltage jaws generate a potential (E) on the loop during resistance (R) measurement.
A current (I) is consequently generated on the loop and is measured by the current jaws. Based on the value of parameters E and I, the instrument displays the resistance R value calculated as their ratio. The value measured by the device can be used in case the single rods do not influence each other.
T2000 also measures AC current up to 20A and leakage current with resolution 0.05mA.
The devices comply with standard IEC/EN 61010-1 in CAT III 150V and they are the ideal solution for measurements to be carried out both domestically and Industrial enviroments.
Functions:
• Earth resistance with stakeless testing method
• Measurement of leakage current on earth systems (Only T2000)
• Setting of alarm thresholds on measurements
• Storage of measurement results
• Detection of disturbance currents on measurements
• Data hold, backlight and auto power off
• Maximum diameter for clamp 32mm
• Serial interface RS-232 for connection to devices (Only T2100)
Main Features:
• 4 x 1.5V AA batteries supplied
• 99 Locations
• LCD 4 digit display + decimal point, backlight
• CAT III 150V
• Size 293x90x66mm
• Weight 1320g
Technical Specifications:
• Resistance measurement 0.010 - 1000Ohms
• Resolution 0.001 - 20M Ohms
TRMS current measurement (Only T2000):
• 0.00mA - 20A
• Resolution 0.05mA ÷ 0.01A
• Basic accuracy ±(2.5% reading + 1mA)
Accessories Provided:
• Resistive test loop
• Batteries
• User Manual
• ISO9000 Calibration certificate
• Connection cable Hypertac / Jack 3.5mm RS232 (Only T2100)
• Rigid carrying case